Features And Controls; Audio Warning System; Digital Throttle And Shift; Instrumentation - Mercury 92‑813054A2 Manual

Section 2 - Getting to Know Your Power Package

Features and Controls

Audio Warning System

Your power package is equipped with an audio warning system. The audio warning system monitors critical components and
informs the operator when a malfunction has occurred. The warning system is not capable of protecting the power package
from damage caused by a malfunction.
When an electronic control system detects a recordable malfunction, the audio warning system will sound to alert the operator.
The duration and type of horn sound depend upon the nature of the fault condition. In the case of any horn sounding, the user
should refer to the helm displays to understand the specific situation.
For the operator to view the fault code of the malfunction indicated and any recommended actions, the power package must be
equipped with a gauge package that supports the warning system and can display fault codes.
The following instruments have screens that display fault codes:
•

VesselView

• SmartCraft System Tachometer
• SmartCraft System Speedometer
The sound from an audio warning horn indicates that a critical fault malfunction has occurred. Operating a power package
with a critical fault can damage components. If the audio warning horn emits a sound, do not continue operations unless
avoiding a hazardous situation.
If the audio warning sounds, stop the engine immediately if you are not in a hazardous situation. Investigate the cause and
correct it, if possible. If you cannot determine the cause, consult an authorized repair facility.

Digital Throttle and Shift

Digital Throttle and Shift (DTS) operating instructions are provided in a separate manual. Refer to Mercury Diesel's SmartCraft
and DTS Operator's Manual.

Instrumentation

VesselView

Your power package may be connected to a SmartCraft VesselView display. The interactive VesselView display continuously
reports real‑time information about speed, performance, engine fault codes, fuel status, water temperature and depth, and
other operating data. When VesselView detects a problem with any connected system, it displays an alarm message to the
boat operator.
VesselView may also be connected to other vessel systems such as GPS, generators, and cabin environmental controls. This
vessel integration allows the operator to monitor and control a wide range of vessel systems from a single display.
Refer to your VesselView operations manual for detailed instructions on how to operate this display.
Page 10
NOTICE
VesselView
27198
90-8M0069748 APRIL 2012
eng