Table of Contents
Advertisement
22/48
Transport and storage
Bosch Rexroth AG, 4WS2EM 10...XL..., RE29583-XL-B/09.20
6 Transport and storage
6.1 Valve transport
Danger of damage to property and personal injury!
With improper transport, the valve can fall and lead to damage and/or injury since
the parts are e.g. sharp-edged, oily, instable, loose or bulky.
▶
Use the original packaging for transport.
▶
Use personal protective equipment (such as gloves, working shoes,
safety goggles, working clothes, etc.).
▶
Comply with the national laws and regulations regarding occupational health
and safety and transport.
▶
Do not transport the valve using components with little stability, e.g. cables.
Sharp edges!
Danger of cut injury!
▶
Wear suitable protective equipment for the transport of the safety valve.
Further information regarding the transport is available from Bosch Rexroth,
see chapter 16.1 "List of addresses".
Report any transport damage to your responsible sales contact person within
one week. The addresses of the sales subsidiaries can be found on the Internet
on: http:/www.boschrexroth.com/adressen
6.2 Storing the hydraulic valve
Hydraulic valves are delivered in an unobjectionable state.
For the transportation and storage of the product, always observe the
environmental conditions specified in "Data sheet 29583-XL". Improper storage
may damage the valve.
Hydraulic valves can be stored for up to 12 months under the following conditions:
▶
Ensure a storage temperature range of +5...+40 °C.
▶
The relative air humidity must not exceed 65%.
▶
The storage rooms must provide 100% UV protection.
▶
No ozone formation may occur near the storage facility.
▶
Do not store the valve outdoors but in a well-ventilated room.
▶
The storage facilities must be free from etching substances and gases.
▶
Protect the valve against humidity, particularly ground humidity. Store the valve
on a shelf or on a pallet.
▶
Store the valve protected against impacts and sliding and do not stack it.
CAUTION
Advertisement
Table of Contents
