Installation - Zanussi ZBC40440 User Manual

Installation

The microwave can be fitted in position A, B
or C:
Chimney
Cable clip
A
C
Niche size
Position
W D
A 560 x 550 x 450 20
B 560 x 500 x 450 20
C 560 x 550 x 460 20
Measurements in (mm)
Installing the appliance
1. Remove all packaging and check
carefully for any signs of damage.
2. If the microwave is fitted in position C,
ensure that the minimum air gaps are
maintained as shown in the diagram.
3. Secure four cupboard retention blocks in
position using the setting template
(TMAPTA004URR0).
4. Fit the appliance into the kitchen
cupboard, lift over the bottom/front
blocks then push slowly, and without
force, until the front frame of the oven
seals against the front opening of the
cupboard.
5. Ensure the appliance is stable and not
leaning.
www.zanussi.com
TINS_B110URR0 1_Arabic-2.pdf 30
Chimney
Cable clip
B
Gap
between
Chimney
H cupboard &
ceiling
50
50
Not
applicable
6. Fix the oven in position with the screws
provided. The fixing points are located
within the louvre areas at the top and
bottom of the oven (see diagram, item 1
on page 7).
7. Fit the frame fastener caps to the four
fixing positions (2 spare caps are
provided).
8. It is important to ensure that the
installation of this product conforms to
the instructions in this operation manual
and the conventional oven or hob
manufacturer's installation instructions.
A
Conventional
oven
B
65 mm
C
30
16/04/2015 12:07:08