General Operating Guidelines For The Safety Arm System - Technimount System BRACKET PRO 101 Series User Manual

Table of Contents

Advertisement

GENERAL OPERATING GUIDELINES FOR THE SAFETY ARM SYSTEM

9 Use the Safety Arm System only as described in
its user guide.
9 Read all the labels and instructions on the
product before using the Safety Arm System.
9 Always inspect the Clamp Block, Safety Pin, Lock
Pin, and Standard Surface Base before every use.
9 Installing or removing the Safety Arm System
requires a minimum of one (1) trained operator.
9 Do not remove the Safety Arm System or device
from the system while moving with the cot/
stretcher.
9 Stay with the patient and control the Safety Arm
System and device during transport at all times.
WARNING
9 Never let a patient grab, manipulate or hold the Safety Arm System, the Standard Surface Base or bracket on the
cot/stretcher because it may cause injury to the operator or patient. Secure the Safety Arm System and bracket as
recommended while the patient is on the cot/stretcher.
Return To Table of Contents
26
Operation Guide
BP101 UG 202111-01
www.technimount.com

Advertisement

Table of Contents
loading

Table of Contents