Table of Contents
Advertisement
Updating Firmware on HDC2022EVM
Figure 17. UniFlash Launch Screen, MSP430F5528 device selected.
8. Browse to the firmware file named USB2ANY-F5528-24MHZ.txt and select Load Image.
Upon successful programming, the firmware image will be loaded and the HDC2022EVM will
automatically restart. The HDC2022EVM firmware upgrade is then complete.
18
HDC2022EVM User's Guide
Copyright © 2019, Texas Instruments Incorporated
www.ti.com
SNIU039 – December 2019
Submit Documentation Feedback
Advertisement
Table of Contents
Need help?
Do you have a question about the HDC2022EVM and is the answer not in the manual?