Section 4: Operations; Disabling Switch - Grizzly T27417 Owner's Manual

Oscillating edge belt & spindle sander
Table of Contents

Advertisement

SECTION 4: OPERATIONS

To reduce your risk of
serious injury, read this
entire
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Model T27417 (Mfd. Since 09/15)
manual
BEFORE

Disabling Switch

The switch can be disabled by removing the key,
as shown below. Disabling the switch in this man-
ner can prevent unauthorized operation of the
machine, which is important if it is not kept inside
an access-restricted building or in a location
where children may be present.
IMPORTANT: Disabling the switch only restricts
its function. It is not a substitute for disconnecting
machine from power when adjusting or servicing.
Figure 15. Disabling switch by removing key.
Children or untrained people can be
seriously injured by this machine. This
risk increases with unsupervised operation.
To help prevent unsupervised operation,
always disable switch before leaving
machine unattended. Make sure to place
key in a well-hidden or secure location!
-17-

Advertisement

Table of Contents
loading

Table of Contents