Table of Contents
Advertisement
27. Install bearing sleeve (#79) into compression
spring (#80).
28. Install bearing cover (#77).
29. Install wheel support (#55), as shown in
Figure 45.
Wheel Support
Figure 45. Installing wheel support.
-32-
30. Re-install base (#125) onto tables (#30 &
#41), then re-install table tilt brackets (#43 &
#45) and table tilt lock knobs (#103).
31. Re-connect two brown wires to rectifier (refer
to Figure 35 on Page 29), then re-install bot-
tom guard (#134).
Model T27417 (Mfd. Since 09/15)
Advertisement
Table of Contents
