Cisco 8800 Series Hardware Installation Manual page 10

Fabric Card Overview
Fabric Card Overview
Table 5: Feature History Table
The Cisco 8800 series routers are powered by the Cisco Silicon One Q200 and Q100 series processors.
Cisco 8800 Series Routers support the following Q100 Silicon based fabric cards:
• 8818-FC—Cisco 8818 Fabric Card based on Q100 Silicon
• 8812-FC—Cisco 8812 Fabric Card based on Q100 Silicon
• 8808-FC—Cisco 8808 Fabric Card based on Q100 Silicon
Cisco 8800 Series Routers support the following Q200 Silicon based fabric cards:
Caution
The system does not support a mix of Q100 Silicon based fabric cards and Q200 Silicon based fabric cards.
Attempting to mix Q100 and Q200 Silicon based fabric cards in a system could result in an equipment failure.
Temperature and Physical Specifications
For temperature and physical specifications, refer to the Physical characteristics table in the
Routers Data
Weight and Power Consumption
For weight and power consumption, refer to the Physical characteristics table in the
Data
Airflow Direction
To ensure proper airflow for the router in your facility, position the router with its air intake on a cold aisle
and the air exhaust on a hot aisle.
Maximum Power Available to the Router
The maximum power available for operations depends on the input power from your power source, the number
and output capabilities of your power supplies, and the power redundancy mode that you use.
The following table lists the amount of power available for Cisco 8800 series routers from all available power
trays.
Hardware Installation Guide for Cisco 8800 Series Routers
4
Sheet.
Sheet.
Cisco 8800 Series Routers Overview
Cisco 8000 Series
Cisco 8000 Series Routers