Fabric Card Leds - Cisco 8800 Series Hardware Installation Manual

LEDs
LED
STS (Status)
ACT (Active)
GPS
SYNC

Fabric Card LEDs

The fabric cards are located behind the fan trays.
Color Status
This router processor is operational with no issues.
Green
Flashing green The auto or manual FPD upgrade in-progress.
Flashing The module has minor alarm.
amber
Flashing red The module has active major or critical alarms.
Amber The module is in one of the following states:
• Power cycle
• Reload or reimage
• Shutdown
Red BIOS boot failure. Also, the ATTN LED remains blue.
Off The module is not enabled.
Green The RP/RSP is in the Active state.
Off The RP/RSP is in the Standby state.
Green The GPS interface is provisioned and frequency, time of day and phase
inputs are all operating correctly.
Off The GPS interface is not provisioned, or the GPS inputs are not working
correctly.
The frequency, time, and phase are synchronized to an external
Green
interface. The external interface could be:
• BITS
• GPS
• Recovered RX Clock
Amber The system is running in holdover or free-run mode and it is not
synchronized to an external interface.
Off The centralized frequency or time and phase distribution is not enabled.
Hardware Installation Guide for Cisco 8800 Series Routers
Fabric Card LEDs
93