Intended Use; Assembly (Fig. 1); Dismantling (Fig. 1) - Vermeiren Quadri-light Instruction Manual

5. Intended use

L
WARNING: Risk of falling - Do not use
the rollator if you have weak arm
function or poor equilibrium.
The rollator will compensate the lack of
adequate support by the legs by leaning on,
or moving with, the rollator with usage of the
upper limbs or chest. The rollator will provide
a better stability, support and safety during
walking.
However, it cannot be used by persons with a
visible weakened hand and/or arm function
and also not by persons with a balance
problem.
The rollator can be used indoor and outdoor.
The rollator should only be used on surfaces
where all four wheels are touching the ground.
Not to be used on rocky terrain or steep hills
(see technical details: max. inclination) so the
rollator can become unstable.
The product is not meant for transport of
people and/or goods. The seat can only be
used when the parking brake is locked.

6. Assembly (Fig. 1)

L
CAUTION: Chance of pinching - Do
not place fingers
components of the rollator.
L
CAUTION: Risk of clamping - Keep
fingers away from moving parts of
the rollator.
Steps 1-9 shall be used for first time use or for
transportation of the rollator.
1. Remove packaging.
2. Loosen the velcro straps.
3. Place the rollator on his side.
4. Move the rear wheel downwards ()
until the holes lie over each other.
5. Mount the star button .
6. Move the front wheel downwards
until the holes lie over each other.
7. Mount the star button .
8. Place the rollator on his other side.
9. Repeat steps 4 - 7 for the other side.
10. Unfolding rollator
 Unfold the rollator by pushing on the
handgrips.
 Push on the tubes of the seat  to
unfold the rollator further. Keep pushing
until the locking mechanism is secured.
 Check that the rollator is firmly secured
and cannot fold anymore.
11. Adjust the pushing handgrips to the
desired height (see further).

7. Dismantling (Fig. 1)

L
L
between the
3
Fig. 1 – Assembly / dismantling rollator
CAUTION: Chance of pinching - Do
not place fingers
components of the rollator.
CAUTION: Risk of clamping - Keep
fingers away from moving parts of the
rollator.
1. Adjust the pushing handgrips to the
minimum position (see further).
2. Folding rollator
 Pull lightly on the handgrip of the seat
 until the locking mechanism came
loose and the rollator can be folded (do
these when you stand straight).
 Fold the rollator by pushing on the
handgrips or pulling on the tubes of the
seat .
3. For transportation
 Remove the star button .
 Fold the front wheel upwards.
 Remove the star button .
 Fold the rear frame / wheel upwards .
 Fasten the rear frame / wheel with the
velcro straps to the frame of the
handgrips.
 Repeat the steps above for the other
side.
Quadri-light
2014-10
between the