AEMC PowerPad 8335 Application Notes page 4

Setup
1-
Once the unit is turned ON, by pressing the green button
in the bottom-left-hand corner, the unit powers up and defaults to the
Waveform Mode
showing the waveform icon and frequency.
This function is the top-right of the six blue
main mode function buttons.
Date, time and battery
2-
The user can depress the
instrument using navigation keys. There are 11 options in the setup. One option to note is the Electrical Hookup.
down arrow
Use the
You should see a screen similar to
the instrument using DataView
Figure 1.
PowerPad Model 8335 setup screen
®
4 different screens for 4 different hook-ups
To change the setup using the panel, simply scroll through the options using the
ENTER
and pressing the
www.aemc.com
4
capacity are displayed in the top-right-corner of the screen
SETUP
button
key to scroll down to the desired function and press the
Figure 1. Figure 2
software.
®
key when the desired function is highlighted.
, the second grey button on the left side, to configure the
shows the example of the screen seen while configuring
Figure 2.
arrow
Technical Assistance (800) 343-1391
ENTER
key
DataView setup screen
®
keys
.