Download Print this page

AEMC PowerPad 8335 Application Notes page 3

Three-phase power quality analyzer
Hide thumbs Also See for PowerPad 8335:

Advertisement

1
The PowerPad
Model 8335
®
of the unit from left to right, the unit has
five voltage
and MR probes) and
selectable. The unit auto-detects and auto-configures itself according to which probes are connected to it.
2
Just to the right of the display on the right-hand-side is an
This allows the user to connect to a power panel and the computer without danger due to an accidental fault.
Below the USB port is a
power
NiMH battery pack. The battery pack has a 10-hour continuous operational capacity and a 35-hour record mode capacity.
Power to this port can be 110/230V
3
operational menu buttons
There are four
From top-to-bottom they are RETURN, CONFIGURATION, SNAPSHOT, and
4
The six blue buttons on the bottom right are direct access
TRANSIENT/INRUSH CURRENT
top-to-bottom they are:
ALARM
MODE,
TREND
MODE, and
5
sub-menu buttons
There are six
menu mode. The function for each of these buttons change according to the display function or mode in use. The sub-menus
available in the waveform mode for example are
7
arrow keys
The
allow the user to move within the menus as seen on the
9
The
enter button
allows the user to choose and enter changes to the setting within the menus.
10
ON/OFF button
The green
is located at the far lowest left hand corner.
This light up if the external charger is charging the instrument.
Technical Assistance (800) 343-1391
has been laid out with ease of use and maximum functionality in mind. Looking at the top
four current inputs
inputs. It is possible to use different current probes per channel. Input voltage ratio are
optically isolated USB
port. This supplies power to the unit from an external power supply and charges the internal
Model 8335
, 50/60Hz. The
ac
(light gray buttons) located on the lower left front panel.
MAIN MODE function
MODE,
POWER/ENERGY
MODE.
just below the screen. These allow the user to choose the sub-menus available in a particular
6
8
to enable the use of current sensors (MN, SR, AmpFlex
port.
can be used while charging.
HELP
buttons. From left-to-right and then
HARMONIC
MODE,
WAVEFORM
side-bar menu
on the right-side of the display
®
, MiniFlex
®
,
MODE,
www.aemc.com
3

Advertisement

loading