Adaptec 5325301638 Administrator's Manual page 124

Installing Third-Party Agent Software
Installing the VERITAS NetBackup 4.5 FP6 Client
This section describes how to install the Veritas NetBackup 4.5 FP agent on a Snap
Server to enable interoperability with NetBackup 4.5 Feature Pack 6 for Windows.
Procedures for installing from the following media are given:
• The CD for Veritas NetBackup 4.5 Feature Pack 6 for AIX, HP-UX
• The tarball named NB45FP6_AIX_HP_Linux.tar.Z
At the time this document was published, the tarball was available at the
Tip
following URL: http://seer.support.veritas.com/docs/264638.htm.
Installation from a Tarball
This procedure assumes you created a directory on the Snap Server for the purposes
of this installation at /shares/SHARE1/NBclientinstall.
Connect to the Snap Server via SSH, and log in as admin using your admin user
1
password.
To change to superuser, enter the following command and press
2
su -
At the prompt, enter the admin user password, and press
3
To change to the NBclientinstall directory, enter the following command and
4
press
Enter
cd /shares/SHARE1/NBclientinstall
To unpack the agent files, enter the following command and press
5
tar -xvzf NB45FP6_AIX_HP_Linux.tar.Z
A number of files and directories are listed. Delete the unecessary Java
6
installation files by running the following command:
rm -vR /shares/SHARE1/NBclientinstall/NB-Java
To start the NetBackup client install run the following command:
7
./NBClients/catalog/anb/client.inst
110 Snap Server Administrator Guide
:
:
Enter
.
Enter
:
Enter