Adaptec 5325301638 Administrator's Manual page 105

Snap Disk 30SA and Snap Disk 32SA Disk Drive & Power/Fan Module
Behavior
This section describes the LED indicators on the Snap Disk 30SA and Snap Disk
32SA's disk drives and power /fan modules.
Snap Disk 30SA and Snap Disk 32SA Disk Drive LEDs
The Snap Disk 30SA and Snap Disk 32SA have two LEDs at the edge of each disk
drive as shown in the following illustration.
The LEDs operate as follows operate as follows:
Status
Solid green
Blinking green
Solid green
Off
Fault
Off
Off
Solid amber
Off
Chapter 10 Troubleshooting Snap Servers
The Meaning of LED Indicators
Status
Fault
Condition of Disk Drive
Disk drive installed properly but is not active
Disk drive installed properly and actively
reading/writing information
Disk drive installed, but not working correctly
No disk drive installed
91