Adaptec 5325301638 Administrator's Manual page 123

Installing a VERITAS NetBackup 3.4.1 Client
This section describes how to install the UNIX/Linux agent from VERITAS
NetBackup.
Copy the NetBackup NBClients directory and the Linux directory from the root of
1
the NetBackup CD to the agent directory on the Snap Server.
Connect to the Snap Server via SSH, and login as admin using your admin user
2
password.
To change to superuser, enter the following command and press
3
su -
At the prompt, enter the admin user password, and press
4
To change to the agent directory, enter the following command and press
5
cd /shares/SHARE1/agent
To run the client installation, type the following command:
6
./NBClients/catalog/anb/client.inst
Press and follow the prompts on the screen.
Enter
Choose Linux as the OS, and press
7
At the end of the installation process, a few errors will appear saying that the
Tip
installer cannot find the CD-ROM. This is caused by the installer attempting to
unpackage the Java files. The required Java files are already on the Snap Server
and are not a required component of the installation.
The VERITAS NetBackup client is now installed.
Close the SSH client, and then return to the Administration Tool and do the
8
following:
To disable SSH on the Snap Server, navigate to the
a
No, and then click
To start the newly installed backup agent, navigate to the
b
Shutdown/Reboot
will start each time you reboot the Snap Server.
Delete the NBClients and Linux directories that you copied from the CD to the
9
Snap Server as they are no longer needed.
To verify the success of the installation, use your backup management software
10
to configure and run a test backup.
.
Enter
. SSH is immediately disabled.
OK
screen, and click
Reboot
Installing Third-Party Agent Software
Enter
.
Enter
System > SSH
Maintenance >
. In the future, the NetBackup client
:
:
Enter
screen, select
109