Table of Contents
Advertisement
Installing Your Controller
In this Chapter
Configuring ATA Drives
Configuring ATA Drives
When configuring drives for the Adaptec 2400A, you need to
Select and configure compatible drives..
Attach supplied ATA cables.
ATA Drives
Your Adaptec 2400A controller supports ATA/66 and ATA/100
hard drives only. Use ATA/100 cables only.
RAID drives should be as alike as possible in terms of capacity and
performance. Set the drives to operate as a master (factory default).
If previously used, format the drive according to manufacturer's
recommendations.
2
2-1
2-2
2-6
2-8
2-8
2-10
2-1
Advertisement
Table of Contents
