Arcconf Setstate - Adaptec 5405Z User Manual

arcconf setstate

Changes the state of a physical device or logical device from its current state to the designated
state.
Syntax
ARCCONF SETSTATE <Controller#> DEVICE <Channel#> <Device#> <State> [LOGICALDRIVE
<LD#>[LD#] ... ] [noprompt]
ARCCONF SETSTATE <Controller#> LOGICALDRIVE <LD#> OPTIMAL [ADVANCED <option>]
[noprompt]
Parameters
Controller# is the controller number
Channel# is the channel number for the drive
Device# is the device number for the device.
LD# is the logical drive number.
State:
HSP—Create a hot spare from a ready drive
●
RDY—Remove a hot spare designation
●
DDD—Force a drive offline (to Failed).
●
<option> is an optional keyword/option pair. Set option to Nocheck to force a
ADVANCED
logical drive to the Optimal state without performing a consistency check.
Noprompt: No prompt for confirmation.
Example
ARCCONF SETSTATE 1 DEVICE 0 0 HSP LOGICALDRIVE 1 2 3
ARCCONF SETSTATE 1 DEVICE 0 0 RDY LOGICALDRIVE 2
ARCCONF SETSTATE 1 LOGICALDRIVE 1 OPTIMAL ADVANCED nocheck
Chapter 2: Using the Command Line Utility
24
●