Table of Contents
Advertisement
•
Ensure the tractor PTO master shield is in
place, lowered and in good condition.
•
Ensure each mower slip clutch shield is
secured in place and in good condition.
•
Ensure the driveline slip clutches are properly
adjusted and the friction plates are not frozen
together. Reference the Maintenance Section
for proper slip clutch maintenance.
•
Inspect the condition of driveline shear bolts. A
sheared bolt indicates that the driveline slip
clutch is frozen or damaged.
rated size and grade shear bolts indicated in
the maintenance section. OPS-R-0010_A
•
Perform scheduled lubrication as specified in
the maintenance section.
•
Inspect each gearbox oil level using dipstick
level indicator and replenish if needed. A low
oil level is a warning sign that the gearbox may
be cracked or its seal is damaged and needs to
be replaced.
•
Ensure all gearbox vents are in place and free
from clogs. OPS-R-0011_C
•
Inspect blades and blade bolts for looseness
and excessive wear. Make sure the mower is
securely blocked up before crawling beneath.
Replace damaged, worn, and missing blades
as complete sets to maintain rotary balance.
•
Ensure carrier hub nuts are tightened with the
cotter pin inserted and spread.
•
Inspect the condition of the deck skid shoes
and the skid shoe attaching hardware. OPS-R-
0012_A
V1280 07/16
© 2016 Alamo Group Inc.
OPERATION
Only use the
Operation Section 4-18
Advertisement
Table of Contents
