Gui Application; Installation; Slvub00B - February 2017 - Revised March 2018 - Texas Instruments BOOSTXL-DRV8320 Series User Manual

GUI Application

4 GUI Application
4.1

Installation

Follow these steps to install the GUI application:
Step 1. Download and run theSetup_boostxldrv832x-1.0.0_EVM.exe installer file to install the GUI
application.
Step 2. Install the COM port driver for TI MSP430 USB (the firmware on MSP430F5529 LaunchPad
development kit).
This driver is automatically installed during the GUI installation process. Click the Install button when the
window shown in Figure 32
drivers are already installed.
20
BOOSTXL-DRV8320x EVM User's Guide
Figure 30. Error Initializing Emulator
Figure 31. Updating LaunchPad development kit Firmware
appears during the GUI installation. If this pop-up does not appear, then the
Copyright © 2017–2018, Texas Instruments Incorporated
SLVUB00B – February 2017 – Revised March 2018
Submit Documentation Feedback
www.ti.com