Table of Contents
Advertisement
Hardware Overview
2
Hardware Overview
2.1
Hardware Connections Overview – DRV8320x + MSP430F5529
Figure 2
shows the major blocks of the hardware where the BOOSTXL-DRV8320x BoosterPack™ plug-in
module is mounted on the MSP430F5529XL LaunchPad development kit. The BOOSTXL-DRV8320x is
designed for an input supply from 6 to 54 V and up to 15-A drive current. Three half h-bridges capable of
driving a three-phase BLDC motor implementing sensored or sensorless control. Hall sensor pins a, b, c
are connected to pins P2.0, P2.2, and P2.6 of the MSP430™ MCU, respectively. The 3.3-V supply to the
Hall sensors is derived by the LMR16006XDDCR buck converter integrated in the DRV8320x.
3x CSD88584Q5DC
TPD4S009DCKRG4
OPA374AIDBVTG4
4
BOOSTXL-DRV8320x EVM User's Guide
Figure 2. Hardware Connections Overview
Copyright © 2017–2018, Texas Instruments Incorporated
DRV8320x
LMR16006XDDCR
SLVUB00B – February 2017 – Revised March 2018
Submit Documentation Feedback
www.ti.com
Advertisement
Table of Contents
