Table of Contents
Advertisement
38
3
Lift it up a little, then move it away from the housing.
Opening the side panel
A microswitch is located on the side panel. It helps indicate whether
the panel is removed or intact.
1
Turn off your system unit and unplug all cables.
2
Place the system unit on a flat, steady surface.
3
Open then remove the front panel door. Refer to page 37 for
more detailed instructions.
4
Remove the two front screws with a Phillips screwdriver. Keep
them in a safe place for later use.
3 Upgrading your system
Advertisement
Table of Contents
