3
Retype the password to verify your first entry then press Enter.
4
Highlight the Set or Change Password option then press Enter.
5
Press Esc to return to the System Security screen.
6
Press Esc to exit Setup. The Exit Setup screen appears.
7
Choose Yes to save your settings and exit Setup. Your password
will be saved to CMOS.
Removing a password
To remove your Supervisor/User password:
1
Disable the Supervisor Password or User Password parameter in
the System Security menu by pressing the up or down arrow key
to select None.
2
Press Esc to return to the System Security menu.
3
Press Esc to exit Setup. The Exit Setup screen appears:
4
Choose Yes to save your settings and exit Setup. Your previous
password will be removed from CMOS.
81