Table of Contents
Advertisement
72
Power Management
The Power Management menu allows you to configure the system's
power management feature.
The following screen shows the pameters on the Power Management
screen:
Parameter
Power
Management
Mode
IDE Hard Disk
Standby Timer
Description
Allows you to reduce power consumption.
When this parameter is set to Enabled, you
can configure the IDE hard disk and system
timers. Setting it to Disabled deactivates
the power-management feature and its
timers.
Allows the hard disk to enter standby
mode after inactivity of 1 to 15 minutes,
depending on your setting. When you
access the hard disk again, allow 3 to 5
seconds (depending on the hard disk) for
the disk to return to normal speed. Set this
parameter to Off if your hard disk does not
support this function.
4 BIOS Setup utility
Option
Enabled
Disabled
Off
1 minute
15 minutes
Advertisement
Table of Contents
