Table of Contents
Advertisement
Removing the left-side panel
1
Observe the ESD precautions and pre-installation procedures
described on page 39.
2
Remove the bezel door and the bezel.
Refer to the preceding sections for detailed instructions.
3
Loosen the three thumbscrews located at the end of the side panel
closest to the front panel (1).
4
Slide the side panel slightly forward (2), then tilt it outward (3)
and upward (4) before detaching it from the chassis.
Removing the air baffle
Once you remove the left-side panel, most of the system's internal
components are still hidden from view by the air baffle. Remove the
air baffle to allow easy access to the system components.
Follow the steps below to remove the air baffle:
1
Press the release latch on the right (1) and left (2) side of the air
baffle.
43
Advertisement
Table of Contents
