Multi 7 Days Timer - Daikin AIRHUB Operation Manual

4.4.

Multi 7 Days Timer

-Always "Auto" for Linear Zone system.
-Always "Auto" if you have set
"Sensor selection = Auto select" on On/Off Zone system
Timer Operation
 The procedure for setting the Mode, Set Temperature and Start & Stop
times is the same as for the SIMPLE 7 DAY TIMER.
 Temperature sensor selection
* This setting is only available For On/Off control systems.
(1) Tap "Sensor" icon.
(2) Select the appropriate sensor. The color of "Indoor Sensor" icon will
change.
 Zone selection
*Switch On & Off individual zones by the timer.
(1) Tap the "Zone" icon to access available zones for selection.
(2) Select the desired zone(s) by tapping any of the available zone icons.
(3) The color of "Zone" icon will change.
(4) Tap Save to set the timer setting.
To set the timer for another day of the week, repeat procedure or use the
Copy & Paste icons.
26