Table of Contents
Advertisement
2.7.5
Num Lock After Boot
This parameter allows you to activate the Num Lock function upon booting. The
default setting is Enabled.
2.7.6
Memory Test
When set to Enabled, this parameter allows the system to perform a RAM test
during the POST routine. When set to Disabled, the system detects only the
memory size and bypasses the test routine. The default setting is Disabled.
2.7.7
Configuration Table
This parameter allows you to enable or disable the appearance of the configuration
table after POST but before booting. The configuration table gives a summary of
the hardware devices and settings that BIOS detected during POST. The default
setting is Enabled.
Chapter 2 - BIOS Utility 2-25
Advertisement
Table of Contents
