Table of Contents
Advertisement
4.4.2 5.25-inch Drives
You may install a CD-ROM, digital audio tape (DAT), hard disk, diskette drive or
any other 5.25-inch device into the drive bay.
To install 5.25-inch devices:
1.
Open the front panel. See section 4.3 for more information on opening the
housing panel.
2.
Detach the 5.25-inch drive frame (2 pieces) from the housing by removing two
screws. Keep the screws for later use.
3.
Attach the drive frames to the 5.25-inch device drive securing it with four
screws as shown below.
Chapter 4 - System Housing
4-9
Advertisement
Table of Contents
