Table of Contents
Advertisement
3.2.1
Configure/View Host Adapter Settings Menu
The Configure/View Host Adapter Settings menu lists three settings under SCSI
Bus Interface Definitions and three additional options, as shown below:
Host Adapter SCSI ID: changes the host controller SCSI ID from its default
value of 7
SCSI Parity Checking: enables or disables host controller SCSI parity checking
Host Adapter SCSI Termination: configures host controller SCSI termination
Advanced users can access Boot Device Options, SCSI Device Configuration, and
Advanced Configuration Options through the following menu:
Adaptec AHA-3950U2B
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
Figure 3-2 Configure/View Host Adapter Settings Screen (1 of 2)
You have an AHA-3950U2B SCSI host
adapter in your system. Move the cursor
to the bus:device of the one to be
configured and press <Enter>.
<F5> - Toggle color/monochrome
Chapter 3 – SCSISelect Configuration Utility 3-5
SCSISelect (TM)
BUS Device
00:00:A
00:00:B
Utility
=default)
*
Advertisement
Table of Contents
