2.4
Disk Drives
The Disk Drives menu lets you configure the system hard disk and
disk drive settings.
If your hard disk supports the enhanced IDE
features, you may set the functions using this menu.
The following screen shows the Disk Drives parameters and their
default settings:
Floppy Drive A ........... [xx-MB, xx-inch]
Floppy Drive B ........... [xx-MB, xx-inch]
8 IDE Primary Channel Master
8 IDE Primary Channel Slave
8 IDE Secondary Channel Master
8 IDE Secondary Channel Slave
= Move Highlight Bar,
The triangle mark that precede an item within
a menu indicates that there is a detailed
menu for that particular item. Select the item
to display the menu.
2-10
Disk Drives
= Change Setting, F1 = Help
Page 1/1
User's Guide
Need help?
Do you have a question about the M19A System and is the answer not in the manual?