Zerowire Mobile Transport; Procedure For Moving The Zerowire Mobile - NDS ZeroWire Mobile User Manual

ZeroWire Mobile Transport

Procedure for Moving the ZeroWire Mobile

Warning: To
possibility of the ZeroWire
Mobile accidentally
over while moving the unit, take the
following steps to ensure safety and to
prevent damage.
Lower the ZeroWire Mobile Center
of Gravity
Note: It is recommended that the caster
brake locks be applied to stabilize the
ZeroWire Mobile while
adjustments.
1. Lift the release
simultaneously press down on the
upper handle.
2. Lower the top plate assembly and
monitor until the top plate is
positioned approximately 4" (10 cm)
above the top of the base column.
Release Caster Brake Locks
3. Confirm that all caster brake locks are unlocked in the
upper position, and that all casters roll freely.
4. Confirm that the path of transport is free of cables and
any other obstructions.
Move the ZeroWire Mobile
5. Firmly grasp the upper and lower handles and push the
ZeroWire Mobile in the intended direction.
16 | ZeroWire Mobile Transport
prevent the
tipping
making
lever and
Apply Caster Brake Locks
6. When the ZeroWire Mobile has been relocated, prevent
Top Plate
Assembly
Release
Lever
Upper
Handle
Lower
Handle
Locked
accidental movement of the unit by applying the caster
brake locks.
4"
(10 cm)
Base
Column
Caster
Brake Locks
Unlocked