Zerowire Mobile Monitor Installation; Mounting A Monitor To The Zerowire Mobile; Connecting A Monitor To The Zerowire Mobile - NDS ZeroWire Mobile User Manual

ZeroWire Mobile Monitor Installation

Mounting a Monitor to the ZeroWire Mobile

1. Tilt the mounting plate back to a horizontal position.
2. Place the monitor on the mounting plate and align the monitor's VESA 100 x 100 mm hole mount pattern to
the corresponding hinged mounting plate screw holes. Attach the monitor using the provided M4 thumb
screws. Lightly tighten each screw until all 4 screws have been installed, and then tighten each screw securely.

Connecting a Monitor to the ZeroWire Mobile

1. Remove the monitor cable cover.
2. Connect the monitor DC power cable first to the ZeroWire Mobile DC output connector, and then to the
monitor DC input connector, with the power cable passing between the release lever and monitor.
Note: The capped port is reserved for future use.
3. Reinstall the monitor cable cover.
14 | ZeroWire Mobile Monitor Installation