Zerowire Mobile Assembly; Assembly Procedure - NDS ZeroWire Mobile User Manual

ZeroWire Mobile Assembly

Components of the ZeroWire Mobile stand
included in your shipment:
1 Hinged Mounting Plate
2 Top Plate
3 Inner Extrusion Subassembly
4 Outer Extrusion Subassembly
5 M6x16mm Cap Head Screw (2x)
6 M6 Flat Washer (2x)
7 Release Lever
8 Release Lever Subassembly
9 Channel Adapter
10 Handle Subassembly
11 M6x12mm Flat Hd SOC Screw (2x)
12 Base
13 Casters
Brake Caster (4x)
Electric Conductive (ESD) Caster (1x)
14 M12x65mm Cap Head Screw (5x)
15 M6x12mm Button Head Screw (4x)
16 M6 Star Washer Ext Tooth (4x)
17 Base Cover
18 M6x35mm Cap Head Screw (4x)
19 M6 Flat Washer (4x)

Assembly Procedure

1. Attach Casters (13) to underside of Base (12)
with M12x65mm Cap Head Screws (14) using
10 mm Allen Key, torqued to 131 lb·in (14.8
N·m). Suggested placement of ESD caster at
rear leg location.
2. Attach Base to Outer Extrusion Subassembly
(4) with M6x35mm Cap Head Screws (18) and
Flat Washers (19) using 5 mm Allen Key,
torqued to 28.4 lb·in (3.2 N·m).
3. Attach Base Cover (17) to Base with
M6x12mm Button Head Screws (15) and M6
Split Washers (16) using 4 mm Allen Key,
torqued to 28.4 lb·in (3.2 N·m).
4. Attach Handle Subassembly (10) to the Channel Adapter (9) on the Outer Extrusion Subassembly with
M6x12mm CSK Head Screws (11) using 4 mm Allen Key, torqued to 13.5 lb·in (1.5 N·m).
5. Attach Hinged Mounting Plate (1) to the Top Plate (2) of the Inner Extrusion Subassembly (3) with M6x16mm
Cap Head Screws (5) and M6 Flat Washers (6) using 4 mm Allen Key, torqued to 28.4 lb·in (3.2 N·m).
6. Attach Release Lever (7) to the Inner Extrusion Subassembly by screwing the threaded end of the Release
Lever into the Release Lever Subassembly (8), and securely hand-tighten.
1
2
3
4
12
13
14
15 15
5
6
7
WA
RN
IN G
To avo TIP
stan id pot PIN
d or ent ial G HA
Bef ore pus h the inju ZA
disp lay atte mp ting stan ry, do RD
cas ters to the d wh not lean
han . Sec low to mo ile a aga
ds dur ure ly est ve the cas ter inst the
Ref ere ing gra sp pos itio stan is lock
DO nce tran spo rt. the n and d, low ed.
NOT the use r stan unl ock er the
REM OVE ma nua d wit all
– PER l for h bot
MA NEN mo re h
T WA info
RNI rma tion
NG NOT .
ICE!
9 10
11
D S
E N
U S W E R
P O LE
D U
M O
LY
O N 01
D 00
: 30
P N
16 17
ZeroWire Mobile Assembly | 9
8
19
18