Table of Contents
Advertisement
Charging Station Installation
Wall Mounting Procedure
Warning: Installation of the Charging Station Wall Mount Bracket (90Z0176) must be performed by a
skilled professional. The wall mount installation must secure weight loads ranging from 27 lbs (12.12 kg)
to 34 lbs (15.42 kg) as shown below.
1. Determine an appropriate wall location with unobstructed access to a grounded AC mains power outlet that
is clear of obstacles to regular foot traffic required to move power modules to and from the charging station
and ZeroWire Mobile Stand(s).
2. Determine location of wall studs on which the wall mount bracket will be attached, and determine an
ergonomic height for the charging station installation.
(90.17 mm)
2.0" (50.8 mm)
(155.575mm)
3.625"
(92.075 mm)
18.125"
(460.375 mm)
14.5"
(368.3 mm)
3. When the Wall Mount Bracket has been securely installed to the wall location, position the Bracket Tab Slots
on the back of the Charging Station over the Bracket Tabs of the Wall Mount Bracket and carefully lower the
Charging Station until both Slots are securely mounted on the Tabs.
4. Connect the Charging Station to AC mains using the provided hospital grade AC mains Power Cable (P/N
35D0022-B). Illuminated LEDs below each charging bay indicate that the Charging Station is powered on.
Charging Station
Power Module
Wall Mount Bracket
2 Modules Total Weight:
4 Modules Total Weight:
3.55"
Wall Mount Bracket Front View
6.125"
Charging Station Back View
19.0 lb.
8,62 kg
3.5 lb.
1,59 kg
1.0 lb.
0,45 kg
27.0 lb.
12,25 kg
34.0 lb.
15,42 kg
20.875" (530.225 mm)
18" (457.2 mm)
30.25" (768.35 mm)
18" (457.2 mm)
Bracket
Tab (2x)
2.0" (50.8 mm)
6.125"
(155.575mm)
Bracket
Tab
Slot (2x)
Cushion
Pad (6x)
Charging Station Installation | 11
Advertisement
Table of Contents
