Table of Contents
Advertisement
TEMPERATURE ADJUSTMENT
Press or hold either Down
or Up
button until
the desired temperature is seen on the display. This
temperature will be automatically maintained anywhere
between 62° F (17° C) and 86° F (30° C).
If you want the display to read the actual room tempera-
ture, refer to "FAN ONLY MODE" below.
FAN SPEED ADJUSTMENT
Select the Fan Speed in four steps: Auto, Low, Med or
High. Each time the button is pressed, the fan speed
mode is shifted. During Dry mode, the fan speed is kept
at Low automatically.
OPERATING MODE (FUNCTION) SELECTION
To choose operating mode, press the Mode button.
Each time you press the button, a mode is selected in a
sequence that goes from AUTO, COOL, DRY, and FAN. The
indicator light beside will be illuminated and will remain
on once the mode is selected.
USING AUTO FEATURE
When you set the air conditioner in AUTO mode, it will
automatically select cooling or fan only operation de-
pending on the current room temperature and the target
temperature you have set. The air conditioner will con-
trol room temperature automatically. In this mode, the
fan speed cannot be adjusted.
USING DRY MODE
In this mode, the air conditioner will generally operate in
the form of a dehumidifier. Since the conditioned space is a
closed or sealed area, there will be some degree of cooling.
FAN ONLY MODE
Use this function only when cooling is not desired, such as
for room air circulation or to exhaust stale air. Remember
to open the vent during this function, but keep it closed
during cooling for maximum cooling efficiency. You can
choose any fan speed you prefer.
During this function, the display will show the actual room
temperature, not the set temperature as in the cooling
mode. In Fan Only mode, the temperature is not adjusted.
–9–
Advertisement
Table of Contents
