2. Attach right-angle safety lock using the ¾" (or ½") length hex-head screws as shown
(Fig. X).
STEP 9: INSTALL CHASSIS INTO CABINET AND REATTACH FRONT PANEL.
1. Lift air conditioner chassis and carefully slide into cabinet leaving 6 inches protrud-
ing.
2. DO NOT push on controls or finned coils.
3. Be sure chassis is firmly seated towards rear of cabinet.
4. Re-installation process of front panel, filter and grille is the reverse of what you did
in Step 1, above. You need to use the four screws for the front panel but do not
refasten the shipping screws, as explained previously.
STEP 10: INSTALLATION OF R1 ENERGY STAR INSULATION
Jump to the section titled Installation of R1 Energy Star Insulation found after all of the
installation instructions.
Safety Lock
¾" (or ½") Hex-Head locking
screw I
Fig. X
–22–