AJAX KeyPad Combi User Manual page 27

Learn more
To use a common duress code
1. Activate the device keypad by swiping your hand over it.
2. Enter the common duress code.
3. Press the disarming button
For example: 4321
To use a personal duress code
1. Activate the device keypad by swiping your hand over it.
2. Enter the User ID.
3. Press the * (Function button).
4. Enter the personal duress code.
5. Press the disarming button
For example: 2 *
Security management using Tag or Pass
1. Activate the device keypad by swiping your hand over it. KeyPad Combi beeps
(if enabled in the settings) and enables indication of the current security
status.
2. Bring Tag or Pass to the KeyPad Combi reader. It is marked with wave icons.
3. Press the Arm, Disarm, or Night mode button on KeyPad Combi.
Note that if Easy armed mode
need to press the Arm, Disarm, or Night mode button. The system or group security mode (if
the device is group-bound) will change to the opposite after tapping Tag or Pass.
.
.
4422
change is enabled in the KeyPad Combi settings, you do not