RADEMACHER Troll Standard 5620 Instruction Manual page 23

i
8. Safety instructions for the electrical connection
Using an incorrect installation housing can lead to personal injury
and damage to property (electric shocks / short circuiting).
◆ Only use the installation housing provided to connect and install
the Troll Standard.
◆ Installation housings of other RADEMACHER products, such as
other Troll controllers, are not compatible.
Connection of a second phase to E1 or E2 will cause the Troll
Standard to be damaged.
◆ When using the inputs [ E1 / E2 ], they must always be connected
to the same phase [ L ] as the supply voltage.
◆ If another phase is connected, the incorrect mains voltage (380 V /
50 Hz) will be applied to the inputs and damage the Troll Standard.
◆ Follow the pin assignment detailed in the connection diagram.
WARNING! WARNING!
WARNING! WARNING!
EN
23