Intended Use; Improper Use; Expert Knowledge Required By The Installer - RADEMACHER Troll Standard 5620 Instruction Manual

i

3.1 Intended use

Use the Troll Standard only for connecting and controlling a tubular
motor for roller shutters, Venetian blinds, slats or awnings.
Operating conditions
◆ The tubular motor must be fitted with a mechanical or electronic
end position switch.
◆ Only operate the Troll Standard in dry rooms.
◆ A 230 V/50 Hz power supply, together with a site-provided discon-
necting device (fuse), must be available at the installation location.
i

3.2 Improper use

Using the Troll Standard for purposes other than those previously men-
tioned is impermissible.
There is a risk to life caused through short circuiting and electric
shocks if the Troll Standard is used outside or in damp rooms.
Do not install and use the Troll Standard outdoors or in damp rooms.
i

3.3 Expert knowledge required by the installer

The electrical connection, installation and commissioning of the Troll
Standard must only be carried out by a qualified electrician in accord-
ance with the instructions in this manual..
8
EN