RADEMACHER Troll Standard 5620 Instruction Manual page 45

19.3 Menu 9.6 - Configuring the blockage detection
Motor types
1 06
1 10
2 10
2 20
2 30
2 40
2 50
If the installed motor type is unknown, please select:
1 06 for roller shutters with an area of up to 1.5 m
2 30 for larger roller shutters
4.
i
i
5.
Ø
|
| 35 mm
| 35 mm
| 45 mm
| 45 mm
| 45 mm
| 45 mm
| 45 mm
Set and confirm the sensitivity.
Sensitivity:
1 = low
6 = high
Test runs should be made to ascertain the highest possible
sensitivity in order to protect the roller shutter in the event
of blockage.
It may be necessary to customise the cut-off sensitivity
depending on the properties of the roller shutter (weight,
running characteristics etc.).
Activate/ deactivate the reversing function
after a blockage is detected.
On = reversing function on
Off = reversing function off
| Power
| 6 Nm
| bis 10 Nm
| bis 10 Nm
| bis 20 Nm
| bis 30 Nm
| bis 40 Nm
| bis 50 Nm
2
EN
45