Graco GL-1 X Instructions-Parts List Manual page 5

Installation Instructions
Volume Adjustment (F . 3)
IG
2
Maximum adjustment setting is when adjusting screw
(2) is just making contact with the indicator pin (8),
8
(inside, not shown) with no inlet pressure. Turn adjust-
ing screw (2) clockwise, to reduce output. To adjust,
loosen lock nut (3) and turn adjusting screw (2) the num-
3
ber of turns indicated on the GL-1 X or GL-1 XL Volume
Output Guide to obtain the desired volume. Tighten lock
nut (3) when desired volume setting is reached
.
F . 3
IG
Volume Output Guide
335023J 5