Table of Contents
Advertisement
The device driver software automatically detects the cRIO-9036. If the device driver
software does not detect the cRIO-9036, verify that you installed the appropriate NI
software in the correct order on the host computer.
Tip
You can also use the Ethernet port to connect directly to the host computer or
network. Refer to the user manual on
Ethernet connections.
Related Information
Installing Software on the Host Computer
Configuring the System in Measurement &
Automation Explorer (MAX)
Complete the following steps to find the system in MAX.
1.
Launch MAX on the host computer.
2.
Expand Remote Systems in the configuration tree and locate your system.
3.
Select your target.
Tip
number, such as NI-CRIO-9036-1856AAA.
Setting a System Password
Complete the following steps to set a system password.
Note
The default username for the cRIO-9036 is
password for the cRIO-9036, so you must leave the password field blank when
logging in until you set a system password.
1.
Right-click your system and select Web Configuration.
The NI Web-Based Configuration and Monitoring utility opens in your default browser
and is where you set the password. If you have not installed Microsoft Silverlight,
NI Web-based Configuration & Monitoring prompts you to do so.
2.
Enter a unique name for your system in the Hostname field.
3.
Click the Security Configuration icon.
4.
Click Login.
5.
In the Login dialog box, enter the username
6.
Click OK.
7.
Click Change Password.
8.
Enter and re-enter a new password.
9.
Click OK.
10. Click Save.
11. Click OK to confirm you are changing the password.
MAX lists the system under the model number followed by the serial
ni.com/manuals
on page 5
and leave the password field blank.
admin
NI cRIO-9036 Getting Started Guide | © National Instruments | 11
for more information about
. There is no default
admin
Advertisement
Table of Contents
