Ap Label - NETGEAR WAC104 User Manual

Figure 4. Examples of recommended antenna positions

AP label

The AP label on the bottom panel of the AP shows the default login information, serial
number and MAC address of the AP, and other information. Depending on when you
purchased your AP, the label might also show the default WiFi network names (SSIDs)
and default WiFi passphrase.
The following figure is an example. The label on your AP might look differently.
Figure 5. AP label
If the label does not show the defaults SSIDs and default WiFi passphrase, use the
following information:
• The default SSID in the 2.4 GHz radio band is NETGEAR_11N with the default WiFi
passphrase sharedsecret.
• The default SSID in the 5 GHz radio band is NETGEAR_11AC with the default WiFi
passphrase sharedsecret.
Hardware Overview of the
Access Point
802.11ac Wireless Access Point Model WAC104
12 User Manual