View Devices On The Network - NETGEAR WAC104 User Manual

View devices on the network

You can view the active wired and WiFi devices in both the network to which the AP is
connected and the AP network. If you do not recognize a WiFi device, it might be an
intruder.
To display the attached wired and WiFi devices:
1. Connect your computer or mobile device to the AP in one of the following ways:
• Connect directly to the AP's WiFi network or LAN.
• Connect to the same network that the AP is connected to.
2. Launch a web browser and enter http://www.aplogin.net (or aplogin.net) in the
address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use aplogin.net on page 24.
A login window displays.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The Home page displays.
4. Select Administration > Attached Devices.
Wired devices are connected to the AP with Ethernet cables. WiFi devices are
connected to the AP through the WiFi network, in either the 2.4 GHz band or the 5
GHz band.
The following table describes the fields on the Attached Devices page.
Manage the AP and Monitor the
Traffic
802.11ac Wireless Access Point Model WAC104
59 User Manual