Manage Neighbor Ap Detection - NETGEAR WAX630E User Manual

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
c. To remove a MAC address from the Untrusted Stations table, select the MAC
address and click the Remove button.
You can search the Untrusted Stations table.
When you remove a device from the Untrusted Stations table, after the access
point redetects the device, the device is once again placed in the Available
Stations table.
10. Click the Apply button.
Your settings are saved. For information about manually adding MAC addresses to
those in the Trusted Stations table or Untrusted Stations table, see Manually set up
a MAC access control List on page 119.
For more information about applying an ACL to a WiFi network, see Select a MAC
ACL for a WiFi network on page 209.
WiFi devices in the Trusted Stations table can access the WiFi network to which you
apply the ACL. WiFi devices in the Untrusted Stations table cannot access the WiFi
network to which you apply the ACL.

Manage neighbor AP detection

The access point can detect neighbor access points (APs) in a radio band and you can
classify them as known APs.
If you enable neighbor AP detection for a radio band, the access point regularly scans
the WiFi network, collects information about all access points on the channels, and
maintains a list of access points it detects in the area. Initially all detected access points
are displayed in the Unknown AP List. You can add access points that you are familiar
with to the Known AP List. You can also import a list of known access points in the Known
AP List.
CAUTION: Access points in the Unknown AP List require further investigation. They
could be rogue access points, which use the SSID of a legitimate network. These types
of access points can present a serious security threat.
The following sections describe how you can manage neighbor AP detection and add
neighbor access points to the Known AP List:
• Enable neighbor access point detection and move access points to the Known AP
List
• Import an existing neighbor access point list in the Known AP List
Manage Access and Security 125 User Manual