NETGEAR WAC104 User Manual page 34

4. Select Setup > Wireless Setup.
5. View or change the basic WiFi settings and security settings.
The following table describes the fields on the Wireless Network page.
Field Description
AP Name The name of the AP. By default, the name is WAC104.
Region From the menu, select the region in which the AP operates. For some countries, you cannot
change the region because it is preset.
Note: Make sure the country is set to the location where the device is operating. The
customer is responsible for complying within the local, regional, and national regulations
set for channels, power levels, and frequency ranges.
Note: It might not be legal to operate the AP in a region other than the regions listed in
the menu. If your country or region is not listed, check with your local government agency.
Manage the Basic WiFi Network
Settings
802.11ac Wireless Access Point Model WAC104
34 User Manual