Table of Contents
Advertisement
Phase 7
A6P00335
STOVE BASE
(x1)
330
INDUCTIVE BURNER KIT
#4 X 5/8" SCREWS INCLUDED WITH THE STOVE KIT.
NOTE: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
"AA" BATTERY (x3)
(Not Included)
(x1)
335
(x1)
STOVE BASE
98
STEP 2
A6P00330
INDUCTIVE BURNER KIT
(1)
ASSEMBLY NOTE:
ALWAYS WASH TOYS BEFORE USE.
•
REMOVE THE FIRST COVER BY TWISTING IT COUNTER
CLOCKWISE. REMOVE THE BATTERY COVER AND INSTALL
THE BATTERIES (NOT INCLUDED). PUT THE BATTERY
COVER BACK ON AND CONTINUE TO THE NEXT DIAGRAM.
•
DO NOT MIX OLD AND NEW BATTERIES
•
DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC), OR
RECHARGEABLE (NI-CAD,NI-MH, ECT.) BATTERIES.
ASSEMBLY NOTE:
FIRST INSTALL THE COVER YOU
REMOVED ABOVE WITH THE INCLUDED
HARDWARE. INSTALL THE BURNER BY
TWISTING IT CLOCKWISE TO LOCK IT IN
PLACE.
Advertisement
Table of Contents
