Table of Contents
Advertisement
Owner's Manual
You will need to make sure that your
assembly is square before tightening
your bolts.
For proper assembly you will need to
ensure that your structure is level before
proceeding to the next step.
Some steps in the assembly process will
require an extra set of hands. Make sure
you have a helper available.
Th is icon shows the size of an open
ended wrench. Using the wrench as the
fraction bar.
Tools Required for Installation
When you see this icon you will need
a socket wrench. Th e icons below show
the size of attachments needed for
assembly 1/2.
Th is icon warns you to not over tighten
your bolts. Th is is to prevent structural
damage and also splintering your wood.
When you see this icon you will need
a ladder to complete the step. Do NOT
stand on the set when it is unstable
and not anchored. Failure to do so may
result in injury.
Th is icon will show you what drill
attachments are needed. For this
example you will need a Phillips head
attachment and 3/8 socket.
12
Advertisement
Table of Contents
