Home >
Troubleshooting
Report
> Transfer Faxes to Another Fax Machine
Transfer Faxes to Another Fax Machine
If you have not set up your Station ID, you cannot enter Fax Transfer mode.
>> MFC-J491DW/MFC-J497DW
>> MFC-J690DW/MFC-J895DW
MFC-J491DW/MFC-J497DW
1. Press Stop/Exit to interrupt the error temporarily.
2. Press Settings.
3. Press a or b to select the following:
a. Select [Service]. Press OK.
b. Select [Data Transfer]. Press OK.
c. Select [Fax Transfer]. Press OK.
4. Do one of the following:
•
If the LCD displays [No Data], there are no faxes left in the machine's memory.
Press c, and then press Stop/Exit.
•
Enter the fax number where faxes will be forwarded.
5. Press Black Start.
MFC-J690DW/MFC-J895DW
1. Press
to interrupt the error temporarily.
2. Press
[Settings] > [All Settings] > [Service] > [Data Transfer] > [Fax Transfer].
3. Do one of the following:
•
If the touchscreen displays [No Data], there are no faxes left in the machine's memory.
Press [Close], and then press
•
Enter the fax number where faxes will be forwarded.
4. Press [Fax Start].
Related Information
•
Transfer Your Faxes or Fax Journal Report
•
Set Your Station ID
>
Error and Maintenance Messages
.
>
Transfer Your Faxes or Fax Journal
454