Brother MFC-J491DW Online User's Manual page 365

Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network
®
Wi-Fi Direct > Configure Your Wi-Fi Direct Network
Configure Your Wi-Fi Direct Network Manually
>> MFC-J491DW/MFC-J497DW
>> MFC-J690DW/MFC-J895DW
MFC-J491DW/MFC-J497DW
If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network manually.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Network]. Press OK.
b. Select [Wi-Fi Direct]. Press OK.
c. Select [Manual]. Press OK.
3. The machine will display the SSID name and Password for three minutes. Go to your mobile device's
wireless network settings screen and enter the SSID name and password.
4. If your mobile device connects successfully, the machine displays [Connected]. You have completed the
Wi-Fi Direct network setup.
MFC-J690DW/MFC-J895DW
If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network manually.
1. Press [Settings] > [All Settings] > [Network] > [Wi-Fi Direct] > [Manual].
2. The machine will display the SSID name and Password. Go to your mobile device's wireless network settings
screen and enter the SSID name and password.
If your mobile device connects successfully, the machine displays [Connected]. You have completed the Wi-Fi
Direct network setup.
Related Information
• Configure Your Wi-Fi Direct Network
• Wi-Fi Direct Network Configuration Overview
> Configure Your Wi-Fi Direct Network Manually
> Use
358