Brother MFC-J491DW Online User's Manual page 363

Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network
®
Wi-Fi Direct > Configure Your Wi-Fi Direct Network
Method of Wi-Fi Protected Setup
Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi
Protected Setup
>> MFC-J491DW/MFC-J497DW
>> MFC-J690DW/MFC-J895DW
MFC-J491DW/MFC-J497DW
If your mobile device supports the PIN Method of Wi-Fi Protected Setup
a Wi-Fi Direct network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received.] will appear on the LCD. Press c to connect.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Network]. Press OK.
b. Select [Wi-Fi Direct]. Press OK.
c. Select [Group Owner]. Press OK.
d. Select [On]. Press OK.
e. Select [PIN Code]. Press OK.
3. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for
instructions) when [Activate Wi-Fi Direct on other device.] appears. Press c on your Brother
machine. This will start the Wi-Fi Direct setup.
4. The machine will wait for a connection request from your mobile device. If the LCD prompts you to enter a
PIN, enter the PIN displayed on your mobile device in the machine. Press OK.
5. If your mobile device connects successfully, the machine displays [Connected]. You have completed the
Wi-Fi Direct network setup.
MFC-J690DW/MFC-J895DW
If your mobile device supports the PIN Method of Wi-Fi Protected Setup
a Wi-Fi Direct network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received. Press [OK] to connect.] will appear on the LCD.
Press [OK] to connect.
1. Press [Settings] > [All Settings] > [Network] > [Wi-Fi Direct] > [Group Owner] >
[On] > [PIN Code].
2. When [Activate Wi-Fi Direct on other device. Then Press [OK].] is displayed, activate
your mobile device's WPS PIN configuration method (see your mobile device's user's guide for instructions),
and then press [OK] on your Brother machine.
This will start the Wi-Fi Direct setup.
3. The machine will wait for a connection request from your mobile device. When [PIN Code] appears, enter
the PIN displayed on your mobile device in the machine. Press [OK].
If your mobile device connects successfully, the machine displays [Connected]. You have completed the Wi-Fi
Direct network setup.
™
(WPS)
™
(WPS)
> Configure Your Wi-Fi Direct Network Using the PIN
™
(WPS), follow these steps to configure
™
(WPS), follow these steps to configure
> Use
356